3 open source boards using the LM3881MME/NOPB

Real designs built with the LM3881MME/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LM3881MME/NOPB in open source designs

The gallery holds 3 open source boards using the LM3881MME/NOPB from 3 GitHub repositories; a typical one measures about 100 × 77.5 mm and carries around 240 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is Lpddr4-test board by antmicro.

Parts used alongside the LM3881MME/NOPB

Microcontrollers on boards using the LM3881MME/NOPB

What boards using the LM3881MME/NOPB are built for

LM3881MME/NOPB: common questions

Where can I find a LM3881MME/NOPB reference design?

Each of the 3 boards on this page is a real design using the LM3881MME/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM3881MME/NOPB?

The AP62600SJ-7, KSZ9031RNXCA and MIC61300YML-TR appear in the most repositories here.

Which microcontrollers do boards using the LM3881MME/NOPB use?

Most are built on FPGA (1) and RP2040/RP2350 (1).

How big is a typical board using the LM3881MME/NOPB?

The median is 100 × 77.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the LM3881MME/NOPB?

By GitHub stars, Lpddr4-test board by antmicro, with 51 stars.

Can I simulate one of these boards using the LM3881MME/NOPB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part