2 open source boards using the LM73100

Real designs built with the LM73100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LM73100 in open source designs

The gallery holds 2 open source boards using the LM73100 from 2 GitHub repositories; a typical one measures about 75 × 55 mm and carries around 169 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is PocketPD HW by CentyLab.

Parts used alongside the LM73100

Microcontrollers on boards using the LM73100

What boards using the LM73100 are built for

LM73100: common questions

Where can I find a LM73100 reference design?

Each of the 2 boards on this page is a real design using the LM73100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM73100 use?

Most are built on RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the LM73100?

The median is 75 × 55 mm, and 50% are two-layer designs.

What is the most popular open source board using the LM73100?

By GitHub stars, PocketPD HW by CentyLab, with 196 stars.

Can I simulate one of these boards using the LM73100 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part