8 open source boards using the LM78M05
Real designs built with the LM78M05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
PicoChain RPi Reference Device Implementation
jasonalexander-ja
68 × 50 mm41 parts4LMIT1IbScaleSeqRails
ibScale
203 × 64 mm287 parts4LCERN-OHL-S-2.00AVR/Arduino
Controller mb atu
c3h9dx
115 × 69.8 mm56 parts2LNo license0AVR/Arduino
Controller mb usb
c3h9dx
115 × 69.8 mm37 parts2LNo license0AVR/Arduino
Controller mb inh ptt
c3h9dx
115 × 69.8 mm33 parts2LNo license0PicoChain Generic Reference Device Implementation
jasonalexander-ja
68 × 34 mm22 parts4LMIT1PIC
Controller
CarnivalBen
108.2 × 143.4 mm48 parts2LNo license0Otopto01
minamonra
67 × 34 mm23 parts2LNo license0
How designs wire the LM78M05
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LM78M05 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 100 µF).
- The VO pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 330 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: Signal 57% · 12V 43% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VOpin 3 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PicoChain Generic Reference Device Implementation by jasonalexander-ja, Controller mb atu by c3h9dx, Controller mb inh ptt by c3h9dx and Controller mb usb by c3h9dx.
The LM78M05 in open source designs
The gallery holds 8 open source boards using the LM78M05 from 7 GitHub repositories; a typical one measures about 111.6 × 66.9 mm and carries around 39 components.
63% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is PicoChain RPi Reference Device Implementation by jasonalexander-ja.
Parts used alongside the LM78M05
Microcontrollers on boards using the LM78M05
LM78M05: common questions
Where can I find a LM78M05 reference design?
Each of the 8 boards on this page is a real design using the LM78M05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM78M05 VI pin connected?
The VI pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 7 open source designs using the LM78M05.
What decoupling capacitors do designs use on the LM78M05 VO pin?
The VO pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 330 nF). Counted from the KiCad layouts of 7 open source designs using the LM78M05.
What parts are used alongside the LM78M05?
The ATmega32M1-AU, MCP2551-I-SN and 74HC595 appear in the most repositories here.
Which microcontrollers do boards using the LM78M05 use?
Most are built on AVR/Arduino (3), PIC (1) and Raspberry Pi (1).
How big is a typical board using the LM78M05?
The median is 111.6 × 66.9 mm, and 63% are two-layer designs.
What is the most popular open source board using the LM78M05?
By GitHub stars, PicoChain RPi Reference Device Implementation by jasonalexander-ja, with 1 stars.
Can I simulate one of these boards using the LM78M05 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.