8 open source boards using the LMD18200
Real designs built with the LMD18200, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PICTrackAmplifier
jeremysiebers
105 × 70 mm117 parts2LNo license0
PICTrackAmplifier before DSUB flip
105 × 70 mm103 parts2LNo license0
PocketBeagleCommandStation
RobertPHeller
102.9 × 116.7 mm112 parts2LCC-BY-4.00
PICTrackAmplifier LMD18200 up right
105 × 70 mm97 parts2LNo license0
AVR/ArduinoMotor
marc-cr1810
149.9 × 137.1 mm58 parts2LNo license0
PICTrackAmplifier LMD18200 down right
105 × 70 mm94 parts2LNo license0
BBBCommandStation
39.4 × 108 mm68 parts2LCC-BY-4.00
PBCommandStation
99.1 × 109.2 mm50 parts2LCC-BY-4.00
The LMD18200 in open source designs
The gallery holds 8 open source boards using the LMD18200 from 3 GitHub repositories; a typical one measures about 105 × 89 mm and carries around 96 components.
100% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is TrackAmplifier by jeremysiebers.
Microcontrollers on boards using the LMD18200
LMD18200: common questions
Where can I find a LMD18200 reference design?
Each of the 8 boards on this page is a real design using the LMD18200. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LMD18200 use?
Most are built on PIC (4) and AVR/Arduino (1).
How big is a typical board using the LMD18200?
The median is 105 × 89 mm, and 100% are two-layer designs.
What is the most popular open source board using the LMD18200?
By GitHub stars, TrackAmplifier by jeremysiebers, with 0 stars.
Can I simulate one of these boards using the LMD18200 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.