5 open source boards using the LP2985LV
Real designs built with the LP2985LV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Wifi iot core hw
genuine-engineering
31.8 × 58.4 mm45 parts2LNo license12STM32
Fannyadams
svofski
154.9 × 102.9 mm300 parts2LNo license2AVR/Arduino
H9uno
c3h9dx
68.6 × 53.3 mm30 parts2LNo license0STM32
Ginger2
matrixsmaster
69.5 × 57 mm60 parts2LGPL-2.06NRF24L01
yanntalhouarne
18 × 20.8 mm24 parts2LNo license0
How designs wire the LP2985LV
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LP2985LV connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF).
- Pin 2 is tied to GND on 5 of 5 designs.
- Pin 5 is tied to 3.3V on 5 of 5 designs.
- Pin 3 has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 60% · a signal 40% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: 5V 60% · a signal 40% |
|
| Pin 4 | Connected to: Signal 80% · not connected 20% |
|
| Pin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wifi iot core hw by genuine-engineering, Ginger2 by matrixsmaster, Fannyadams by svofski and H9uno by c3h9dx.
The LP2985LV in open source designs
The gallery holds 5 open source boards using the LP2985LV from 5 GitHub repositories; a typical one measures about 68.6 × 57 mm and carries around 45 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Wifi iot core hw by genuine-engineering.
Microcontrollers on boards using the LP2985LV
What boards using the LP2985LV are built for
LP2985LV: common questions
Where can I find a LP2985LV reference design?
Each of the 5 boards on this page is a real design using the LP2985LV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LP2985LV pin 1?
Pin 1 has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LP2985LV.
How is the LP2985LV pin 2 connected?
Pin 2 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LP2985LV.
How is the LP2985LV pin 5 connected?
Pin 5 is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LP2985LV.
Which microcontrollers do boards using the LP2985LV use?
Most are built on STM32 (3) and AVR/Arduino (1).
How big is a typical board using the LP2985LV?
The median is 68.6 × 57 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP2985LV?
By GitHub stars, Wifi iot core hw by genuine-engineering, with 12 stars.
Can I simulate one of these boards using the LP2985LV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.