13 open source boards using the LPS22DFTR
Real designs built with the LPS22DFTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
OneroiV1
HomeOnDuna
50 × 75 mm160 parts4LNo license1STM32
TMIT FC SMT
keeratrajsinghwork
100 × 100 mm81 parts4LNo license0ESP32
IrisV1
HomeOnDuna
36.7 × 75 mm79 parts2LNo license1ESP32
ErisV1
HomeOnDuna
50 × 50 mm74 parts4LNo license1Main rev b final
iamdarshg
130 × 74.5 mm167 parts4LNo license2Silicon Labs
BLE environmental sensor
atuleu
54.5 × 28 mm24 parts2LCERN-OHL-S-2.00Main rev b final.before diff pair ripup
iamdarshg
130 × 74.5 mm167 parts4LNo license2Main rev b
iamdarshg
140 × 100 mm161 parts4LNo license2Main rev b completed
iamdarshg
140 × 100 mm161 parts4LNo license2Main rev b routed
iamdarshg
140 × 100 mm161 parts4LNo license2Main rev b routed clean
iamdarshg
140 × 100 mm161 parts4LNo license2Main rev b routed iter2 filled
iamdarshg
140 × 100 mm161 parts4LNo license2Main rev b shortfix
iamdarshg
140 × 100 mm161 parts4LNo license2
The LPS22DFTR in open source designs
The gallery holds 13 open source boards using the LPS22DFTR from 4 GitHub repositories; a typical one measures about 130 × 100 mm and carries around 161 components.
85% use four copper layers or more, and 8% carry an open source license.
The most starred is Main rev b final.before diff pair ripup by iamdarshg.
Parts used alongside the LPS22DFTR
Microcontrollers on boards using the LPS22DFTR
What boards using the LPS22DFTR are built for
LPS22DFTR: common questions
Where can I find a LPS22DFTR reference design?
Each of the 13 boards on this page is a real design using the LPS22DFTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LPS22DFTR use?
Most are built on ESP32 (3), Silicon Labs (1) and STM32 (1).
How big is a typical board using the LPS22DFTR?
The median is 130 × 100 mm, and 15% are two-layer designs.
What is the most popular open source board using the LPS22DFTR?
By GitHub stars, Main rev b final.before diff pair ripup by iamdarshg, with 2 stars.
Can I simulate one of these boards using the LPS22DFTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.