3 open source boards using the LS08
Real designs built with the LS08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TA8-FDC
felge1966
160 × 100.3 mm60 parts2LGPL-3.03- schematic only · 97 parts
K-1013-floppy disk controller replica
eduardocasino
97 partsCustom license3 Taito video processor
nmikstas
304.8 × 279.4 mm346 parts2LNo license0
The LS08 in open source designs
The gallery holds 3 open source boards using the LS08 from 3 GitHub repositories; a typical one measures about 232.4 × 189.9 mm and carries around 97 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is K-1013-floppy disk controller replica by eduardocasino.
LS08: common questions
Where can I find a LS08 reference design?
Each of the 3 boards on this page is a real design using the LS08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LS08?
The LS04, LS10, LS32 and LS74 appear in the most repositories here.
How big is a typical board using the LS08?
The median is 232.4 × 189.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the LS08?
By GitHub stars, K-1013-floppy disk controller replica by eduardocasino, with 3 stars.
Can I simulate one of these boards using the LS08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.