2 open source boards using the LT1963AEST-3.3#TRPBF

Real designs built with the LT1963AEST-3.3#TRPBF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LT1963AEST-3.3#TRPBF in open source designs

The gallery holds 2 open source boards using the LT1963AEST-3.3#TRPBF from 2 GitHub repositories; a typical one measures about 83.6 × 78.3 mm and carries around 137 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is VCAT-VehicleControlUnit by lhr-solar.

Parts used alongside the LT1963AEST-3.3#TRPBF

Microcontrollers on boards using the LT1963AEST-3.3#TRPBF

What boards using the LT1963AEST-3.3#TRPBF are built for

LT1963AEST-3.3#TRPBF: common questions

Where can I find a LT1963AEST-3.3#TRPBF reference design?

Each of the 2 boards on this page is a real design using the LT1963AEST-3.3#TRPBF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LT1963AEST-3.3#TRPBF use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the LT1963AEST-3.3#TRPBF?

The median is 83.6 × 78.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the LT1963AEST-3.3#TRPBF?

By GitHub stars, VCAT-VehicleControlUnit by lhr-solar, with 2 stars.

Can I simulate one of these boards using the LT1963AEST-3.3#TRPBF before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part