9 open source boards using the SX1280

Real designs built with the SX1280, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the SX1280

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SX1280 connects to, and the resistors, capacitors and other passives placed on it.

  • The VR_PA pin has a capacitor to GND on 5 of 5 designs, most often 10 nF.
  • The VDD_IN pin has a capacitor to GND on 5 of 5 designs, most often 10 nF (then 1 µF).
  • The VBAT_IO pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 nF).
  • The DCC_FB pin has a capacitor to GND on 5 of 5 designs, most often 10 nF (then 1 µF).
VR_PApin 1Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 nF (5)
VDD_INpin 2Connected to: Signal 80% · VDD_IN 20%
  • Capacitor to GND on 100% · 10 nF (5), 1 µF (2), 470 nF (1)
NRESETpin 3Connected to: The microcontroller 40%
  • Capacitor to GND on 40% · 100 nF (4), 1 nF (4)
  • Inductor on 40%
XTApin 4Connected to: Signal 100%
  • Crystal on 40% · 52 MHz (2)
GNDpin 5, 13, 20, 21, 23, 24, 25Connected to: GND 100%
XTBpin 6Connected to: Signal 100%
  • Crystal on 40% · 52 MHz (2)
BUSYpin 7Connected to: The microcontroller 60%
  • Series resistor on 40% · 100 Ω (2)
DIO1pin 8Connected to: The microcontroller 60%
  • Series resistor on 40% · 100 Ω (2)
DIO2pin 9Connected to: Not connected 60% · a signal 40%
DIO3pin 10Connected to: Not connected 80% · a signal 20%
VBAT_IOpin 11Connected to: Signal 60% · 3.3V 40%
  • Capacitor to GND on 100% · 100 nF (11), 1 nF (4), 2.2 µF (1)
  • Inductor on 60% · 5.6 µH (1)
DCC_FBpin 12Connected to: Signal 80% · VDD_IN 20%
  • Capacitor to GND on 100% · 10 nF (5), 1 µF (2), 470 nF (2)
  • Inductor on 40% · 15 µH (2)
DCC_SWpin 14Connected to: Not connected 60% · a signal 40%
  • Inductor on 40% · 15 µH (2)
VBATpin 15Connected to: Signal 60% · 3.3V 40%
  • Capacitor to GND on 100% · 100 nF (10), 1 nF (4), 2.2 µF (1)
  • Inductor on 60% · 5.6 µH (1)
MISO_TXpin 16Connected to: The microcontroller 40%
  • Series resistor on 60% · 100 Ω (2), 1 kΩ (1)
MOSI_RXpin 17Connected to: The microcontroller 40%
  • Series resistor on 60% · 100 Ω (2), 1 kΩ (1)
SCK_RSTNpin 18Connected to: The microcontroller 40%
  • Series resistor on 60% · 100 Ω (2), 1 kΩ (1)
NSS_CTSpin 19Connected to: The microcontroller 40%
  • Series resistor on 60% · 100 Ω (2), 1 kΩ (1)
RFIOpin 22Connected to: Signal 100%
  • Capacitor to GND on 100% · 8 e-13F (3)
  • Inductor on 60% · 3 nH (3)
  • Series resistor on 40% · 3 nΩ (2)
Pin PADConnected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Base Station v3b by TIGERs-Mannheim, PumaTX MB HW00 by PumaFPV, Rotini-Hardware by AlfredoSystems and Caesar by luhbots.

The SX1280 in open source designs

The gallery holds 9 open source boards using the SX1280 from 5 GitHub repositories; a typical one measures about 80 × 85 mm and carries around 118 components.

100% use four copper layers or more, and 56% carry an open source license.

The most starred is Base Station v3b by TIGERs-Mannheim.

Microcontrollers on boards using the SX1280

SX1280: common questions

Where can I find a SX1280 reference design?

Each of the 9 boards on this page is a real design using the SX1280. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SX1280 VR_PA pin connected?

The VR_PA pin has a capacitor to GND on 5 of 5 designs, most often 10 nF. Counted from the KiCad layouts of 5 open source designs using the SX1280.

How is the SX1280 VDD_IN pin connected?

The VDD_IN pin has a capacitor to GND on 5 of 5 designs, most often 10 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the SX1280.

How is the SX1280 VBAT_IO pin connected?

The VBAT_IO pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 nF). Counted from the KiCad layouts of 5 open source designs using the SX1280.

What parts are used alongside the SX1280?

The SKY66112, 74LVC1G125DBV, 93C76B, BMI-S-204-F and CP11009 appear in the most repositories here.

Which microcontrollers do boards using the SX1280 use?

Most are built on STM32 (4), RP2040/RP2350 (3), ESP32 (1) and Microchip SAM (1).

How big is a typical board using the SX1280?

The median is 80 × 85 mm, and 0% are two-layer designs.

What is the most popular open source board using the SX1280?

By GitHub stars, Base Station v3b by TIGERs-Mannheim, with 9 stars.

Can I simulate one of these boards using the SX1280 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part