2 open source boards using the LTV-844S
Real designs built with the LTV-844S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Beal-RX
anobli
112 × 38 mm71 parts2LCERN-OHL-S-2.00Raspberry Pi
Stathat
skot
65 × 56.5 mm36 parts4LCERN-OHL-S-2.00
The LTV-844S in open source designs
The gallery holds 2 open source boards using the LTV-844S from 2 GitHub repositories; a typical one measures about 88.5 × 47.3 mm and carries around 54 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Beal-RX by anobli.
Microcontrollers on boards using the LTV-844S
What boards using the LTV-844S are built for
LTV-844S: common questions
Where can I find a LTV-844S reference design?
Each of the 2 boards on this page is a real design using the LTV-844S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LTV-844S use?
Most are built on Raspberry Pi (1) and STM32 (1).
How big is a typical board using the LTV-844S?
The median is 88.5 × 47.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the LTV-844S?
By GitHub stars, Beal-RX by anobli, with 0 stars.
Can I simulate one of these boards using the LTV-844S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.