5 open source boards using the M24C64
Real designs built with the M24C64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
BUT Pneumobil - ECU board
kajusK
143.8 × 80 mm261 parts2LNo license0STM32
Tiny waveform generator
m-chwast
85 × 70 mm137 parts4LNo license0STM32
Control board
EERNINUO
100 × 90 mm134 parts4LGPL-3.036STM32
BUT Pneumobil - HMI
kajusK
133.5 × 95 mm115 parts2LNo license0Fv1 module
niektb
40 × 110 mm80 parts2LCC-BY-SA-4.034
The M24C64 in open source designs
The gallery holds 5 open source boards using the M24C64 from 4 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 134 components.
60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Control board by EERNINUO.
Microcontrollers on boards using the M24C64
What boards using the M24C64 are built for
M24C64: common questions
Where can I find a M24C64 reference design?
Each of the 5 boards on this page is a real design using the M24C64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the M24C64 use?
Most are built on STM32 (4).
How big is a typical board using the M24C64?
The median is 100 × 90 mm, and 60% are two-layer designs.
What is the most popular open source board using the M24C64?
By GitHub stars, Control board by EERNINUO, with 36 stars.
Can I simulate one of these boards using the M24C64 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.