2 open source boards using the MAX17055

Real designs built with the MAX17055, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MAX17055 in open source designs

The gallery holds 2 open source boards using the MAX17055 from 2 GitHub repositories; a typical one measures about 90 × 60 mm and carries around 37 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Main board by card-io-ecg.

Microcontrollers on boards using the MAX17055

What boards using the MAX17055 are built for

MAX17055: common questions

Where can I find a MAX17055 reference design?

Each of the 2 boards on this page is a real design using the MAX17055. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MAX17055 use?

Most are built on ESP32 (1) and Nordic nRF (1).

How big is a typical board using the MAX17055?

The median is 90 × 60 mm, and 50% are two-layer designs.

What is the most popular open source board using the MAX17055?

By GitHub stars, Main board by card-io-ecg, with 22 stars.

Can I simulate one of these boards using the MAX17055 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part