5 open source boards using the MAX17261xxTD
Real designs built with the MAX17261xxTD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Main PCB (w/o Adaptor)
cinnamondev
95.9 × 83.3 mm145 parts4LCERN-OHL-S-2.01ESP32
ESP32 Offline GPS MAPS
uzzambutt
75 × 130 mm67 parts4LNo license1RP2040/RP2350
RC-Transmitter
Yarnemeuris
100 × 75 mm83 parts4LNo license0ESP32
GasBee
Sharki-66
55.5 × 35 mm32 parts2LMIT0ESP32
GasBee-Freerouter
Sharki-66
55.5 × 35 mm32 parts2LMIT0
The MAX17261xxTD in open source designs
The gallery holds 5 open source boards using the MAX17261xxTD from 4 GitHub repositories; a typical one measures about 75 × 75 mm and carries around 67 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is Main PCB (w/o Adaptor) by cinnamondev.
Microcontrollers on boards using the MAX17261xxTD
What boards using the MAX17261xxTD are built for
MAX17261xxTD: common questions
Where can I find a MAX17261xxTD reference design?
Each of the 5 boards on this page is a real design using the MAX17261xxTD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MAX17261xxTD use?
Most are built on ESP32 (3), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the MAX17261xxTD?
The median is 75 × 75 mm, and 40% are two-layer designs.
What is the most popular open source board using the MAX17261xxTD?
By GitHub stars, Main PCB (w/o Adaptor) by cinnamondev, with 1 stars.
Can I simulate one of these boards using the MAX17261xxTD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.