6 open source boards using the MAX31865xAP
Real designs built with the MAX31865xAP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CTA control board
PySpice-org
252 × 152 mm614 parts4LNo license9ESP32
ESP32 Breakouts Playground
PockyBum522
203.1 × 108.1 mm116 parts2LMIT2AVR/Arduino
Slice RTDM
feastorg
70 × 100 mm44 parts2LGPL-3.00Bibby
austingrossman
65 × 56 mm14 parts2LCustom license0- schematic only · 30 partsRaspberry Pi
Bench Top Cell Incubator
AryanPROFFESOR
30 partsMIT0 AVR/Arduino
Valhalla UFH Sensor (SMT)
csdexter
99.6 × 64.3 mm53 parts2LGPL-3.00
How designs wire the MAX31865xAP
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MAX31865xAP connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF).
- The BIAS pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 400 Ω).
- The REFIN+ pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 400 Ω).
- The REFIN- pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 400 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DVDDpin 2 | Connected to: 3.3V 80% · a signal 20% |
|
| VDDpin 3 | Connected to: Signal 60% · 3.3V 40% |
|
| BIASpin 4 | Connected to: Signal 100% |
|
| REFIN+pin 5 | Connected to: Signal 100% |
|
| REFIN-pin 6 | Connected to: Signal 100% |
|
| ISENSORpin 7 | Connected to: Signal 100% |
|
| FORCE+pin 8 | Connected to: A connector 100% |
|
| FORCE2pin 9 | Connected to: Signal 100% |
|
| RTDIN+pin 10 | Connected to: A connector 100% |
|
| RTDIN-pin 11 | Connected to: A connector 100% |
|
| FORCE-pin 12 | Connected to: A connector 80% |
|
| GNDpin 13, 19 | Connected to: GND 100% | — |
| DGNDpin 18 | Connected to: GND 100% | — |
| NCpin 20 | Connected to: Not connected 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CTA control board by PySpice-org, ESP32 Breakouts Playground by PockyBum522, Bibby by austingrossman and Valhalla UFH Sensor (SMT) by csdexter.
The MAX31865xAP in open source designs
The gallery holds 6 open source boards using the MAX31865xAP from 6 GitHub repositories; a typical one measures about 99.6 × 100 mm and carries around 49 components.
80% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is CTA control board by PySpice-org.
Microcontrollers on boards using the MAX31865xAP
What boards using the MAX31865xAP are built for
MAX31865xAP: common questions
Where can I find a MAX31865xAP reference design?
Each of the 6 boards on this page is a real design using the MAX31865xAP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX31865xAP VDD pin connected?
The VDD pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the MAX31865xAP.
What resistor goes on the MAX31865xAP BIAS pin?
The BIAS pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 400 Ω). Counted from the KiCad layouts of 5 open source designs using the MAX31865xAP.
What resistor goes on the MAX31865xAP REFIN+ pin?
The REFIN+ pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 400 Ω). Counted from the KiCad layouts of 5 open source designs using the MAX31865xAP.
Which microcontrollers do boards using the MAX31865xAP use?
Most are built on AVR/Arduino (2), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the MAX31865xAP?
The median is 99.6 × 100 mm, and 80% are two-layer designs.
What is the most popular open source board using the MAX31865xAP?
By GitHub stars, CTA control board by PySpice-org, with 9 stars.
Can I simulate one of these boards using the MAX31865xAP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.