6 open source boards using the MAX9814

Real designs built with the MAX9814, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MAX9814

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MAX9814 connects to, and the resistors, capacitors and other passives placed on it.

  • The MICIN pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 470 nF).
  • The MICBIAS pin has a series resistor on 4 of 5 designs, most often 2.2 kΩ (then 150 kΩ).
  • The TH pin has a series resistor on 4 of 5 designs, most often 150 kΩ (then 100 kΩ).
  • The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 470 nF (then 1 µF).
CTpin 1Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 40% · 470 nF (1), 100 nF (1)
  • Series capacitor on 40% · 22 nF (1), 100 nF (1)
SHDNpin 2Connected to: 3.3V 60% · a signal 40%
CGpin 3Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 40% · 2.2 µF (2)
  • Series capacitor on 40% · 2.2 µF (2)
GNDpin 4, 7, 11, 15Connected to: GND 60% · a signal 40%
  • Series capacitor on 40% · 1 µF (8), 2.2 µF (8), 470 nF (8)
  • Series resistor on 40% · 100 kΩ (8)
VDDpin 5Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 60% · 470 nF (2), 1 µF (1), 100 nF (1)
  • Capacitor on 40% · 1 µF (2)
MICOUTpin 6Connected to: The microcontroller 40% · not connected 20%
  • Series resistor on 40% · 75 Ω (1), 22 kΩ (1)
MICINpin 8Connected to: Signal 80% · not connected 20%
  • Series capacitor on 80% · 100 nF (3), 470 nF (1)
BIASpin 12Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 40% · 470 nF (2)
  • Series capacitor on 40% · 470 nF (2)
MICBIASpin 13Connected to: Signal 80% · not connected 20%
  • Series resistor on 80% · 2.2 kΩ (3), 150 kΩ (3), 130 kΩ (1)
THpin 14Connected to: Signal 80% · not connected 20%
  • Series resistor on 80% · 150 kΩ (3), 100 kΩ (2), 130 kΩ (1)
  • Resistor to GND on 40% · 130 kΩ (1), 100 kΩ (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MiniSpeedCam-1.2 by Valar-Systems, Media board by TheBadZhang, STM32-Walkie-Talkie by ANSHUMANDOCX and Arduino by GarethCooke.

The MAX9814 in open source designs

The gallery holds 6 open source boards using the MAX9814 from 5 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 69 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is MiniSpeedCam-1.2 by Valar-Systems.

Microcontrollers on boards using the MAX9814

MAX9814: common questions

Where can I find a MAX9814 reference design?

Each of the 6 boards on this page is a real design using the MAX9814. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MAX9814 MICIN pin connected?

The MICIN pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 5 open source designs using the MAX9814.

What resistor goes on the MAX9814 MICBIAS pin?

The MICBIAS pin has a series resistor on 4 of 5 designs, most often 2.2 kΩ (then 150 kΩ). Counted from the KiCad layouts of 5 open source designs using the MAX9814.

What resistor goes on the MAX9814 TH pin?

The TH pin has a series resistor on 4 of 5 designs, most often 150 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the MAX9814.

Which microcontrollers do boards using the MAX9814 use?

Most are built on ESP32 (3), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the MAX9814?

The median is 50 × 50 mm, and 50% are two-layer designs.

What is the most popular open source board using the MAX9814?

By GitHub stars, MiniSpeedCam-1.2 by Valar-Systems, with 112 stars.

Can I simulate one of these boards using the MAX9814 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part