5 open source boards using the MC68000FN
Real designs built with the MC68000FN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
A600 ACCEL RAM
PR77
99.4 × 34.5 mm30 parts4LGPL-3.034Sega CDX Reproduction
RGBeter
120.5 × 155 mm260 parts6LCERN-OHL-S-2.05Phram 1
piotr-wiszowaty
100 × 66 mm55 parts2LGPL-3.03Mcd
jack-mil
148 × 70.8 mm69 parts2LNo license268000 CPU Board
MarkD833
101.6 × 53.3 mm32 parts4LCC-BY-NC-4.08
How designs wire the MC68000FN
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MC68000FN connects to, and the resistors, capacitors and other passives placed on it.
- The VMA pin is left unconnected on 5 of 5 designs.
- The BG pin is left unconnected on 3 of 5 designs (a signal on 2).
- The E pin is left unconnected on 3 of 5 designs (a signal on 2).
- The FC2 pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BGpin 11 | Connected to: Not connected 60% · a signal 40% | — |
| BGACKpin 12 | Connected to: Signal 80% · not connected 20% |
|
| BRpin 13 | Connected to: Signal 80% · not connected 20% |
|
| VCCpin 14, 52 | Connected to: 5V 100% |
|
| GNDpin 16, 17, 56, 57 | Connected to: GND 100% | — |
| NCpin 18, 31 | Connected to: Not connected 100% | — |
| HALTpin 19 | Connected to: Signal 80% · not connected 20% |
|
| RESETpin 20 | Connected to: A connector 40% |
|
| VMApin 21 | Connected to: Not connected 100% | — |
| Epin 22 | Connected to: Not connected 60% · a signal 40% | — |
| FC2pin 28 | Connected to: Not connected 60% · a signal 40% | — |
52 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include A600 ACCEL RAM by PR77, 68000 CPU Board by MarkD833, Sega CDX Reproduction by RGBeter and Phram 1 by piotr-wiszowaty.
The MC68000FN in open source designs
The gallery holds 5 open source boards using the MC68000FN from 5 GitHub repositories; a typical one measures about 101.6 × 66 mm and carries around 55 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is A600 ACCEL RAM by PR77.
What boards using the MC68000FN are built for
MC68000FN: common questions
Where can I find a MC68000FN reference design?
Each of the 5 boards on this page is a real design using the MC68000FN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MC68000FN VMA pin connected?
The VMA pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MC68000FN.
How is the MC68000FN BG pin connected?
The BG pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the MC68000FN.
How is the MC68000FN E pin connected?
The E pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the MC68000FN.
How big is a typical board using the MC68000FN?
The median is 101.6 × 66 mm, and 40% are two-layer designs.
What is the most popular open source board using the MC68000FN?
By GitHub stars, A600 ACCEL RAM by PR77, with 34 stars.
Can I simulate one of these boards using the MC68000FN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.