5 open source boards using the MC78M05CDT
Real designs built with the MC78M05CDT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Canfw
PDXostc
68 × 58 mm65 parts2LMPL-2.012NXP
Motor high current sensors
jonblissett
182.8 × 54 mm221 parts2LGPL-3.011Can firewall hardware
PDXostc
68 × 58 mm65 parts2LMPL-2.08NXP
July23
biofoundry
109.5 × 74 mm57 parts2LMIT1Ion
rusefi
66 × 31.8 mm34 parts2LNo license2
How designs wire the MC78M05CDT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MC78M05CDT connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 1 µF).
- Pin 3 has a capacitor to GND on 3 of 5 designs, most often 1 µF (then 4.7 µF).
- Pin 2 is tied to GND on 3 of 3 designs.
- Pin 4 is tied to GND on 2 of 2 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 60% · 9V 40% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: Signal 60% · 5V 40% |
|
| Pin 4 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Canfw by PDXostc, Motor high current sensors by jonblissett, Can firewall hardware by PDXostc and Ion by rusefi.
The MC78M05CDT in open source designs
The gallery holds 5 open source boards using the MC78M05CDT from 5 GitHub repositories; a typical one measures about 68 × 58 mm and carries around 65 components.
100% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Canfw by PDXostc.
Parts used alongside the MC78M05CDT
Microcontrollers on boards using the MC78M05CDT
What boards using the MC78M05CDT are built for
MC78M05CDT: common questions
Where can I find a MC78M05CDT reference design?
Each of the 5 boards on this page is a real design using the MC78M05CDT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MC78M05CDT pin 1 connected?
Pin 1 has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the MC78M05CDT.
How is the MC78M05CDT pin 3 connected?
Pin 3 has a capacitor to GND on 3 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the MC78M05CDT.
How is the MC78M05CDT pin 2 connected?
Pin 2 is tied to GND on 3 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the MC78M05CDT.
What parts are used alongside the MC78M05CDT?
The AT32UC3C, FT232RL-SSOP, MCP25625 and SMF05 appear in the most repositories here.
Which microcontrollers do boards using the MC78M05CDT use?
Most are built on NXP (2).
How big is a typical board using the MC78M05CDT?
The median is 68 × 58 mm, and 100% are two-layer designs.
What is the most popular open source board using the MC78M05CDT?
By GitHub stars, Canfw by PDXostc, with 12 stars.
Can I simulate one of these boards using the MC78M05CDT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.