9 open source boards using the MCP1700x-300xxTT
Real designs built with the MCP1700x-300xxTT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MainPCB SMD V3.1
VoltageFoundryMod
29 × 99 mm85 parts2LGPL-3.01Nordic nRF
Cubitboard
cubit010
330.5 × 126.6 mm204 parts4LNo license0RP2040/RP2350
Eink
dopmore
44.6 × 85.1 mm66 parts2LNo license0RP2040/RP2350
Cybdokey
Cybdo
12 × 46 mm34 parts2LNo license0RP2040/RP2350
Devboard
cubit010
21 × 51 mm33 parts2LNo license0AVR/Arduino
Laser rifle
Dade3e
56 × 15.6 mm27 parts2LNo license0- schematic only · 33 partsRP2040/RP2350
Dev-Board roxstar
roxstar123
33 partsNo license0 AVR/Arduino
Lr 40
Dade3e
39 × 19 mm27 parts2LNo license0RP2040/RP2350
CybdoKeebs hub
Cybdo
290 × 24 mm72 parts2LNo license0
How designs wire the MCP1700x-300xxTT
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP1700x-300xxTT connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 1 µF).
- The VI pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 100% |
|
| VIpin 3 | Connected to: VBUS 71% · a signal 29% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MainPCB SMD V3.1 by VoltageFoundryMod, Cubitboard by cubit010, Devboard by cubit010 and CybdoKeebs hub by Cybdo.
The MCP1700x-300xxTT in open source designs
The gallery holds 9 open source boards using the MCP1700x-300xxTT from 8 GitHub repositories; a typical one measures about 41.8 × 48.5 mm and carries around 34 components.
88% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is MainPCB SMD V3.1 by VoltageFoundryMod.
Parts used alongside the MCP1700x-300xxTT
Microcontrollers on boards using the MCP1700x-300xxTT
What boards using the MCP1700x-300xxTT are built for
MCP1700x-300xxTT: common questions
Where can I find a MCP1700x-300xxTT reference design?
Each of the 9 boards on this page is a real design using the MCP1700x-300xxTT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700x-300xxTT VO pin?
The VO pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the MCP1700x-300xxTT.
What decoupling capacitors do designs use on the MCP1700x-300xxTT VI pin?
The VI pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the MCP1700x-300xxTT.
What parts are used alongside the MCP1700x-300xxTT?
The RP2040, USBLC6-2P6 and W25Q128JVS appear in the most repositories here.
Which microcontrollers do boards using the MCP1700x-300xxTT use?
Most are built on RP2040/RP2350 (5), AVR/Arduino (2) and Nordic nRF (1).
How big is a typical board using the MCP1700x-300xxTT?
The median is 41.8 × 48.5 mm, and 88% are two-layer designs.
What is the most popular open source board using the MCP1700x-300xxTT?
By GitHub stars, MainPCB SMD V3.1 by VoltageFoundryMod, with 1 stars.
Can I simulate one of these boards using the MCP1700x-300xxTT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.