4 open source boards using the MCP1703A-3302/MB
Real designs built with the MCP1703A-3302/MB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Eurorack spinfx
grappendorf
79 × 107 mm79 parts2LNo license16Raspberry Pi
PiPtr
jmlzone
101.6 × 141.7 mm379 parts4LNo license8Phram 1
piotr-wiszowaty
100 × 66 mm55 parts2LGPL-3.03ESP8266
Esp8266 button
ep-infosec
40 × 50 mm35 parts2LCC-BY-4.00
The MCP1703A-3302/MB in open source designs
The gallery holds 4 open source boards using the MCP1703A-3302/MB from 4 GitHub repositories; a typical one measures about 89.5 × 86.5 mm and carries around 67 components.
75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Eurorack spinfx by grappendorf.
Microcontrollers on boards using the MCP1703A-3302/MB
What boards using the MCP1703A-3302/MB are built for
MCP1703A-3302/MB: common questions
Where can I find a MCP1703A-3302/MB reference design?
Each of the 4 boards on this page is a real design using the MCP1703A-3302/MB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP1703A-3302/MB use?
Most are built on ESP8266 (1) and Raspberry Pi (1).
How big is a typical board using the MCP1703A-3302/MB?
The median is 89.5 × 86.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the MCP1703A-3302/MB?
By GitHub stars, Eurorack spinfx by grappendorf, with 16 stars.
Can I simulate one of these boards using the MCP1703A-3302/MB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.