5 open source boards using the MCP42010

Real designs built with the MCP42010, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the MCP42010

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP42010 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 5 has a series resistor on 5 of 5 designs, most often 0 Ω.
  • Pin 7 has a resistor to GND on 5 of 5 designs, most often 0 Ω.
  • Pin 8 has a resistor to GND on 5 of 5 designs, most often 0 Ω.
  • Pin 10 has a series resistor on 5 of 5 designs, most often 0 Ω.
Pin 4Connected to: GND 100%
Pin 5Connected to: Signal 100%
  • Series resistor on 100% · 0 Ω (5)
Pin 7Connected to: Signal 100%
  • Resistor to GND on 100% · 0 Ω (5)
Pin 8Connected to: Signal 100%
  • Resistor to GND on 100% · 0 Ω (5)
Pin 10Connected to: Signal 100%
  • Series resistor on 100% · 0 Ω (5)
Pin 11Connected to: MAX232 100%, AMS1117-3.3 60%, MC33816 60%
  • Capacitor to GND on 100% · 100 nF (20), 1 µF (5)
  • Series resistor on 100% · 700 Ω (5)
Pin 12Connected to: MAX232 100%, AMS1117-3.3 60%, MC33816 60%
  • Capacitor to GND on 100% · 100 nF (20), 1 µF (5)
  • Series resistor on 100% · 700 Ω (5)
Pin 14Connected to: MAX232 100%, AMS1117-3.3 60%, MC33816 60%
  • Capacitor to GND on 100% · 100 nF (20), 1 µF (5)
  • Series resistor on 100% · 700 Ω (5)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stimulator by rusefi, Stimulator by rusefi, Stimulator by rusefillc and Stimulator by glocklueng.

The MCP42010 in open source designs

The gallery holds 5 open source boards using the MCP42010 from 5 GitHub repositories; a typical one measures about 101.6 × 32.4 mm and carries around 150 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Stimulator by rusefi.

Parts used alongside the MCP42010

MCP42010: common questions

Where can I find a MCP42010 reference design?

Each of the 5 boards on this page is a real design using the MCP42010. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP42010 pin 5?

Pin 5 has a series resistor on 5 of 5 designs, most often 0 Ω. Counted from the KiCad layouts of 5 open source designs using the MCP42010.

What resistor goes on the MCP42010 pin 7?

Pin 7 has a resistor to GND on 5 of 5 designs, most often 0 Ω. Counted from the KiCad layouts of 5 open source designs using the MCP42010.

What resistor goes on the MCP42010 pin 8?

Pin 8 has a resistor to GND on 5 of 5 designs, most often 0 Ω. Counted from the KiCad layouts of 5 open source designs using the MCP42010.

What parts are used alongside the MCP42010?

The MAX232, AMS1117-3.3 and MC33816 appear in the most repositories here.

How big is a typical board using the MCP42010?

The median is 101.6 × 32.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP42010?

By GitHub stars, Stimulator by rusefi, with 1,177 stars.

Can I simulate one of these boards using the MCP42010 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part