6 open source boards using the MCP6002-xMS

Real designs built with the MCP6002-xMS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MCP6002-xMS

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP6002-xMS connects to, and the resistors, capacitors and other passives placed on it.

  • The - pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 100 Ω).
  • The V+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF).
  • The V- pin is tied to GND on 5 of 5 designs.
  • Pin 7 has a series resistor on 4 of 5 designs, most often 100 Ω (then 33 kΩ).
Pin 1Connected to: A connector 40%
  • Series resistor on 60% · 100 Ω (1), 33 kΩ (1), 6.8 kΩ (1)
  • Series capacitor on 40% · 1 nF (1)
-pin 2, 6Connected to: 74LVC2T45DC 20%
  • Series resistor on 100% · 10 kΩ (2), 100 Ω (2), 33 kΩ (2)
  • Series capacitor on 40% · 1 nF (2)
+pin 3, 5Connected to: A connector 30% · GND 20%
  • Series resistor on 40% · 5.1 kΩ (2), 100 kΩ (1)
V-pin 4Connected to: GND 100%
Pin 7Connected to: The microcontroller 40%
  • Series resistor on 80% · 100 Ω (1), 33 kΩ (1), 1 kΩ (1)
  • Series capacitor on 40% · 1 nF (1)
V+pin 8Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (4), 10 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RailLink by Misaka0x2730, Rowan by tpcarlson, Useq1 by Emute-Lab-Instruments and RS485-Gassensor by Sarbf1.

The MCP6002-xMS in open source designs

The gallery holds 6 open source boards using the MCP6002-xMS from 5 GitHub repositories; a typical one measures about 60 × 42.8 mm and carries around 75 components.

83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is RailLink by Misaka0x2730.

Parts used alongside the MCP6002-xMS

Microcontrollers on boards using the MCP6002-xMS

What boards using the MCP6002-xMS are built for

MCP6002-xMS: common questions

Where can I find a MCP6002-xMS reference design?

Each of the 6 boards on this page is a real design using the MCP6002-xMS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP6002-xMS - pin?

The - pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the MCP6002-xMS.

What decoupling capacitors do designs use on the MCP6002-xMS V+ pin?

The V+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the MCP6002-xMS.

How is the MCP6002-xMS V- pin connected?

The V- pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP6002-xMS.

Which microcontrollers do boards using the MCP6002-xMS use?

Most are built on STM32 (3), RP2040/RP2350 (2) and Nordic nRF (1).

How big is a typical board using the MCP6002-xMS?

The median is 60 × 42.8 mm, and 83% are two-layer designs.

What is the most popular open source board using the MCP6002-xMS?

By GitHub stars, RailLink by Misaka0x2730, with 133 stars.

Can I simulate one of these boards using the MCP6002-xMS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part