5 open source boards using the MCP73812T-420I-OT
Real designs built with the MCP73812T-420I-OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Spikeling
OpenSourceNeuro
120 × 80 mm211 parts2LGPL-3.021RP2040/RP2350
Controller Interface
humanHardDrive
50 × 50 mm56 parts2LMIT2Nordic nRF
Skulljack
ultimaterobotics
40 × 34.6 mm66 parts2LMIT1STM32
BluePill F4
rogerclarkmelbourne
53.3 × 22.9 mm72 partsNo license51STM32
Projected
jonnor
28 × 28 mm43 parts2LNo license43
How designs wire the MCP73812T-420I-OT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP73812T-420I-OT connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_4 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 4.7 µF).
- The PROG_5 pin has a resistor to GND on 5 of 5 designs, most often 15 kΩ (then 22 kΩ).
- The VBAT_3 pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 4.7 µF).
- The CE_1 pin is tied to VBUS on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CE_1pin 1 | Connected to: VBUS 80% · a signal 20% | — |
| VSS_2pin 2 | Connected to: GND 100% | — |
| VBAT_3pin 3 | Connected to: BATT 80% · a signal 20% |
|
| VDD_4pin 4 | Connected to: VBUS 80% · a signal 20% |
|
| PROG_5pin 5 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BluePill F4 by rogerclarkmelbourne, Projected by jonnor, Spikeling by OpenSourceNeuro and Controller Interface by humanHardDrive.
The MCP73812T-420I-OT in open source designs
The gallery holds 5 open source boards using the MCP73812T-420I-OT from 5 GitHub repositories; a typical one measures about 50 × 34.6 mm and carries around 66 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is BluePill F4 by rogerclarkmelbourne.
Microcontrollers on boards using the MCP73812T-420I-OT
What boards using the MCP73812T-420I-OT are built for
MCP73812T-420I-OT: common questions
Where can I find a MCP73812T-420I-OT reference design?
Each of the 5 boards on this page is a real design using the MCP73812T-420I-OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP73812T-420I-OT VDD_4 pin?
The VDD_4 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the MCP73812T-420I-OT.
What resistor goes on the MCP73812T-420I-OT PROG_5 pin?
The PROG_5 pin has a resistor to GND on 5 of 5 designs, most often 15 kΩ (then 22 kΩ). Counted from the KiCad layouts of 5 open source designs using the MCP73812T-420I-OT.
What decoupling capacitors do designs use on the MCP73812T-420I-OT VBAT_3 pin?
The VBAT_3 pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the MCP73812T-420I-OT.
Which microcontrollers do boards using the MCP73812T-420I-OT use?
Most are built on STM32 (2), ESP32 (1), Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the MCP73812T-420I-OT?
The median is 50 × 34.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP73812T-420I-OT?
By GitHub stars, BluePill F4 by rogerclarkmelbourne, with 51 stars.
Can I simulate one of these boards using the MCP73812T-420I-OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.