6 open source boards using the MCP73832
Real designs built with the MCP73832, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
HHKB controller
tmk
141.5 × 36 mm92 parts2LCustom license260ESP32
Main board
card-io-ecg
85 × 55 mm51 parts4LNo license22Microchip SAM
GpsLoggerLoRa w gps panel
gregdavill
70.2 × 72.6 mm113 parts4LMIT21BenTo-Legacy
benkuper
142 × 23 mm76 parts2LGPL-3.01AVR/Arduino
Rfpirate
s3c
56.1 × 93 mm137 parts4LNo license0Microchip SAM
GpsLoggerLoRa
gregdavill
40.9 × 72.6 mm110 parts4LMIT21
How designs wire the MCP73832
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP73832 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 1 µF).
- The PROG pin has a resistor to GND on 4 of 5 designs, most often 5.1 kΩ (then 1 kΩ).
- The VBAT pin has a decoupling capacitor on 3 of 5 designs, most often 4.7 µF (then 1 µF).
- The VDD pin has a series resistor on 2 of 5 designs, most often 1 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 2 | Connected to: GND 100% | — |
| VBATpin 3 | Connected to: BATT 80% · a signal 20% |
|
| VDDpin 4 | Connected to: Signal 60% · 5V 40% |
|
| PROGpin 5 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HHKB controller by tmk, Main board by card-io-ecg, GpsLoggerLoRa by gregdavill and BenTo-Legacy by benkuper.
The MCP73832 in open source designs
The gallery holds 6 open source boards using the MCP73832 from 5 GitHub repositories; a typical one measures about 77.6 × 63.8 mm and carries around 101 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is HHKB controller by tmk.
Microcontrollers on boards using the MCP73832
What boards using the MCP73832 are built for
MCP73832: common questions
Where can I find a MCP73832 reference design?
Each of the 6 boards on this page is a real design using the MCP73832. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP73832 VDD pin connected?
The VDD pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the MCP73832.
What resistor goes on the MCP73832 PROG pin?
The PROG pin has a resistor to GND on 4 of 5 designs, most often 5.1 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the MCP73832.
What decoupling capacitors do designs use on the MCP73832 VBAT pin?
The VBAT pin has a decoupling capacitor on 3 of 5 designs, most often 4.7 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the MCP73832.
Which microcontrollers do boards using the MCP73832 use?
Most are built on AVR/Arduino (2), Microchip SAM (2) and ESP32 (1).
How big is a typical board using the MCP73832?
The median is 77.6 × 63.8 mm, and 33% are two-layer designs.
What is the most popular open source board using the MCP73832?
By GitHub stars, HHKB controller by tmk, with 260 stars.
Can I simulate one of these boards using the MCP73832 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.