4 open source boards using the MCT6
Real designs built with the MCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dual h bridge
enph253-2025-team5
40.9 × 101.5 mm59 parts2LGPL-3.00
H-Bridge
Luca-Jones
110 × 70 mm59 parts2LNo license0
RP2040/RP2350Robot motherboard
129.3 × 78.7 mm58 parts2LGPL-3.00
RP2040/RP2350Motherboard
100 × 100 mm31 parts2LNo license0
The MCT6 in open source designs
The gallery holds 4 open source boards using the MCT6 from 3 GitHub repositories; a typical one measures about 105 × 89.4 mm and carries around 59 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is H-Bridge by Luca-Jones.
Parts used alongside the MCT6
Microcontrollers on boards using the MCT6
What boards using the MCT6 are built for
MCT6: common questions
Where can I find a MCT6 reference design?
Each of the 4 boards on this page is a real design using the MCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCT6 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the MCT6?
The median is 105 × 89.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCT6?
By GitHub stars, H-Bridge by Luca-Jones, with 0 stars.
Can I simulate one of these boards using the MCT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.