2 open source boards using the MCU_SEEED_XIAO_ESP32-C3

Real designs built with the MCU_SEEED_XIAO_ESP32-C3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MCU_SEEED_XIAO_ESP32-C3 in open source designs

The gallery holds 2 open source boards using the MCU_SEEED_XIAO_ESP32-C3 from 1 GitHub repository; a typical one measures about 100 × 100 mm and carries around 12 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Motor subsystem by HenryLi-0.

What boards using the MCU_SEEED_XIAO_ESP32-C3 are built for

Displays & LEDs 2

MCU_SEEED_XIAO_ESP32-C3: common questions

Where can I find a MCU_SEEED_XIAO_ESP32-C3 reference design?

Each of the 2 boards on this page is a real design using the MCU_SEEED_XIAO_ESP32-C3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the MCU_SEEED_XIAO_ESP32-C3?

The median is 100 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCU_SEEED_XIAO_ESP32-C3?

By GitHub stars, Motor subsystem by HenryLi-0, with 1 stars.

Can I simulate one of these boards using the MCU_SEEED_XIAO_ESP32-C3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.