13 open source boards using the MCU_Seeed_XIAO_RP2040

Real designs built with the MCU_Seeed_XIAO_RP2040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the MCU_Seeed_XIAO_RP2040

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the MCU_Seeed_XIAO_RP2040 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 13Connected to: GND 62% · not connected 23% · a signal 15%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ctrl pad by Somebud0180, PiPad by PiyuSX, 3x3-macropad by Adi-Ari-17 and HyprPad by arjav0703.

The MCU_Seeed_XIAO_RP2040 in open source designs

The gallery holds 13 open source boards using the MCU_Seeed_XIAO_RP2040 from 13 GitHub repositories; a typical one measures about 83.8 × 85 mm and carries around 21 components.

100% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is Ctrl pad by Somebud0180.

Microcontrollers on boards using the MCU_Seeed_XIAO_RP2040

What boards using the MCU_Seeed_XIAO_RP2040 are built for

MCU_Seeed_XIAO_RP2040: common questions

Where can I find a MCU_Seeed_XIAO_RP2040 reference design?

Each of the 13 boards on this page is a real design using the MCU_Seeed_XIAO_RP2040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCU_Seeed_XIAO_RP2040 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the MCU_Seeed_XIAO_RP2040?

The median is 83.8 × 85 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCU_Seeed_XIAO_RP2040?

By GitHub stars, Ctrl pad by Somebud0180, with 2 stars.

Can I simulate one of these boards using the MCU_Seeed_XIAO_RP2040 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part