5 open source boards using the MIC2026-1BM
Real designs built with the MIC2026-1BM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Rx72t 100 pga usb
hirakuni45
120 × 80 mm109 parts2LBSD-3-Clause86STM32
Isoblue
oats-center
115 × 78 mm114 parts4LMIT25PIC
Jupiter Model A
ffich
130.8 × 108 mm125 parts4LMIT1Rx72t 100 pga usb base
hirakuni45
115.6 × 73.5 mm109 parts2LBSD-3-Clause86Usb switch
reivax-boucoi
50 × 50 mm67 parts4LNo license1
The MIC2026-1BM in open source designs
The gallery holds 5 open source boards using the MIC2026-1BM from 4 GitHub repositories; a typical one measures about 115.6 × 78 mm and carries around 109 components.
60% use four copper layers or more, and 80% carry an open source license.
The most starred is Rx72t 100 pga usb base by hirakuni45.
Parts used alongside the MIC2026-1BM
What boards using the MIC2026-1BM are built for
MIC2026-1BM: common questions
Where can I find a MIC2026-1BM reference design?
Each of the 5 boards on this page is a real design using the MIC2026-1BM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC2026-1BM use?
Most are built on PIC (1) and STM32 (1).
How big is a typical board using the MIC2026-1BM?
The median is 115.6 × 78 mm, and 40% are two-layer designs.
What is the most popular open source board using the MIC2026-1BM?
By GitHub stars, Rx72t 100 pga usb base by hirakuni45, with 86 stars.
Can I simulate one of these boards using the MIC2026-1BM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.