2 open source boards using the MIC2619YD6
Real designs built with the MIC2619YD6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Firefish
pimbongaerts
72.2 × 42.8 mm95 parts2LCustom license13AVR/Arduino
PiBook
Wren6991
85 × 85 mm83 parts2LBSD-3-Clause9
The MIC2619YD6 in open source designs
The gallery holds 2 open source boards using the MIC2619YD6 from 2 GitHub repositories; a typical one measures about 78.6 × 63.9 mm and carries around 89 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Firefish by pimbongaerts.
Microcontrollers on boards using the MIC2619YD6
MIC2619YD6: common questions
Where can I find a MIC2619YD6 reference design?
Each of the 2 boards on this page is a real design using the MIC2619YD6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC2619YD6 use?
Most are built on AVR/Arduino (1) and Microchip SAM (1).
How big is a typical board using the MIC2619YD6?
The median is 78.6 × 63.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC2619YD6?
By GitHub stars, Firefish by pimbongaerts, with 13 stars.
Can I simulate one of these boards using the MIC2619YD6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.