2 open source boards using the MICROSDCARD
Real designs built with the MICROSDCARD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Hard wookey motherboard
wookey-project
43 × 66 mm68 parts4LCERN-OHL-1.210AriaBoard
AssociazionePrometeo
108.7 × 74.9 mm63 parts2LNo license0
The MICROSDCARD in open source designs
The gallery holds 2 open source boards using the MICROSDCARD from 2 GitHub repositories; a typical one measures about 75.8 × 70.5 mm and carries around 66 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Hard wookey motherboard by wookey-project.
Microcontrollers on boards using the MICROSDCARD
What boards using the MICROSDCARD are built for
MICROSDCARD: common questions
Where can I find a MICROSDCARD reference design?
Each of the 2 boards on this page is a real design using the MICROSDCARD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MICROSDCARD use?
Most are built on STM32 (1).
How big is a typical board using the MICROSDCARD?
The median is 75.8 × 70.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the MICROSDCARD?
By GitHub stars, Hard wookey motherboard by wookey-project, with 10 stars.
Can I simulate one of these boards using the MICROSDCARD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.