2 open source boards using the MP9942GJ

Real designs built with the MP9942GJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MP9942GJ in open source designs

The gallery holds 2 open source boards using the MP9942GJ from 2 GitHub repositories; a typical one measures about 65.9 × 52.9 mm and carries around 84 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Aixun t3a rev by c0d3z3r0.

Microcontrollers on boards using the MP9942GJ

What boards using the MP9942GJ are built for

MP9942GJ: common questions

Where can I find a MP9942GJ reference design?

Each of the 2 boards on this page is a real design using the MP9942GJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MP9942GJ use?

Most are built on GD32 (1).

How big is a typical board using the MP9942GJ?

The median is 65.9 × 52.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the MP9942GJ?

By GitHub stars, Aixun t3a rev by c0d3z3r0, with 54 stars.

Can I simulate one of these boards using the MP9942GJ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part