6 open source boards using the MT6701CT

Real designs built with the MT6701CT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MT6701CT

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MT6701CT connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 22 µF).
  • The MODE pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
VDDpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (6), 22 µF (1)
MODEpin 2Connected to: 3.3V 60% · a signal 40%
GNDpin 4Connected to: GND 100%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bmacro Dial by KipJM, Stomper by JoKhannn, Volumepad electronics by PhiMaii and Biro 1 by PROJECT-BIRO.

The MT6701CT in open source designs

The gallery holds 6 open source boards using the MT6701CT from 6 GitHub repositories; a typical one measures about 55 × 50 mm and carries around 65 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is Bmacro Dial by KipJM.

Microcontrollers on boards using the MT6701CT

What boards using the MT6701CT are built for

MT6701CT: common questions

Where can I find a MT6701CT reference design?

Each of the 6 boards on this page is a real design using the MT6701CT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MT6701CT VDD pin?

The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the MT6701CT.

How is the MT6701CT MODE pin connected?

The MODE pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the MT6701CT.

Which microcontrollers do boards using the MT6701CT use?

Most are built on STM32 (3) and ESP32 (1).

How big is a typical board using the MT6701CT?

The median is 55 × 50 mm, and 33% are two-layer designs.

What is the most popular open source board using the MT6701CT?

By GitHub stars, Bmacro Dial by KipJM, with 27 stars.

Can I simulate one of these boards using the MT6701CT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part