2 open source boards using the N25Q032A13ESC40F

Real designs built with the N25Q032A13ESC40F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The N25Q032A13ESC40F in open source designs

The gallery holds 2 open source boards using the N25Q032A13ESC40F from 2 GitHub repositories; a typical one measures about 87.6 × 68.6 mm and carries around 61 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Pet on a chip by ept221.

Microcontrollers on boards using the N25Q032A13ESC40F

What boards using the N25Q032A13ESC40F are built for

N25Q032A13ESC40F: common questions

Where can I find a N25Q032A13ESC40F reference design?

Each of the 2 boards on this page is a real design using the N25Q032A13ESC40F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the N25Q032A13ESC40F use?

Most are built on FPGA (1) and RP2040/RP2350 (1).

How big is a typical board using the N25Q032A13ESC40F?

The median is 87.6 × 68.6 mm, and 0% are two-layer designs.

What is the most popular open source board using the N25Q032A13ESC40F?

By GitHub stars, Pet on a chip by ept221, with 12 stars.

Can I simulate one of these boards using the N25Q032A13ESC40F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part