2 open source boards using the N64-Cartridge

Real designs built with the N64-Cartridge, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The N64-Cartridge in open source designs

The gallery holds 2 open source boards using the N64-Cartridge from 2 GitHub repositories; a typical one measures about 97.5 × 60 mm and carries around 97 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Picocart64 v2 by khill25.

Parts used alongside the N64-Cartridge

Microcontrollers on boards using the N64-Cartridge

What boards using the N64-Cartridge are built for

N64-Cartridge: common questions

Where can I find a N64-Cartridge reference design?

Each of the 2 boards on this page is a real design using the N64-Cartridge. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the N64-Cartridge use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the N64-Cartridge?

The median is 97.5 × 60 mm, and 50% are two-layer designs.

What is the most popular open source board using the N64-Cartridge?

By GitHub stars, Picocart64 v2 by khill25, with 26 stars.

Can I simulate one of these boards using the N64-Cartridge before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part