4 open source boards using the NB3N551
Real designs built with the NB3N551, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Fmcw
matthuszagh
118.6 × 83.2 mm432 parts4LApache-2.066FPGA
5-6GHz-FMCW-Radar
Radar-Uniwa
101.8 × 46.9 mm427 parts4LMIT1FPGA
Fmcw nightly
matthuszagh
94.6 × 83.4 mm424 parts4LApache-2.066Clock distro
psu-meteo
127 × 30.5 mm38 parts2LMIT0
The NB3N551 in open source designs
The gallery holds 4 open source boards using the NB3N551 from 3 GitHub repositories; a typical one measures about 110.2 × 65 mm and carries around 426 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is Fmcw by matthuszagh.
Parts used alongside the NB3N551
Microcontrollers on boards using the NB3N551
NB3N551: common questions
Where can I find a NB3N551 reference design?
Each of the 4 boards on this page is a real design using the NB3N551. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NB3N551?
The ADF4158, L7980, LP2985A-10DBVR, LTC2292 and SKY65404 appear in the most repositories here.
Which microcontrollers do boards using the NB3N551 use?
Most are built on FPGA (3).
How big is a typical board using the NB3N551?
The median is 110.2 × 65 mm, and 25% are two-layer designs.
What is the most popular open source board using the NB3N551?
By GitHub stars, Fmcw by matthuszagh, with 66 stars.
Can I simulate one of these boards using the NB3N551 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.