6 open source boards using the TRF37A73
Real designs built with the TRF37A73, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Fmcw
matthuszagh
118.6 × 83.2 mm432 parts4LApache-2.066FPGA
5-6GHz-FMCW-Radar
Radar-Uniwa
101.8 × 46.9 mm427 parts4LMIT1FPGA
Fmcw nightly
matthuszagh
94.6 × 83.4 mm424 parts4LApache-2.066Radar RF
ckflight
42.9 × 24.5 mm138 parts4LGPL-3.055Radar RF
TonyStark2007
42.9 × 24.5 mm138 parts4LGPL-3.015SpectrumAnalyser
richardhosking
180 × 60 mm51 parts2LNo license1
How designs wire the TRF37A73
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TRF37A73 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a capacitor to GND on 5 of 5 designs, most often 100 pF (then 10 nF).
- The RFIN pin has a series capacitor on 5 of 5 designs, most often 18 pF (then 100 pF).
- The RFOUT pin has a series capacitor on 5 of 5 designs, most often 18 pF (then 100 pF).
- The VCC pin has a inductor on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: Signal 100% |
|
| RFINpin 2 | Connected to: Signal 100% |
|
| NCpin 3, 4, 6, 8 | Connected to: GND 80% · not connected 20% | — |
| PWDNpin 5 | Connected to: GND 80% · not connected 20% | — |
| RFOUTpin 7 | Connected to: Signal 100% |
|
| GNDpin 9 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fmcw by matthuszagh, Radar RF by ckflight, Radar RF by TonyStark2007 and 5-6GHz-FMCW-Radar by Radar-Uniwa.
The TRF37A73 in open source designs
The gallery holds 6 open source boards using the TRF37A73 from 5 GitHub repositories; a typical one measures about 98.2 × 53.4 mm and carries around 281 components.
83% use four copper layers or more, and 83% carry an open source license.
The most starred is Fmcw by matthuszagh.
Parts used alongside the TRF37A73
Microcontrollers on boards using the TRF37A73
What boards using the TRF37A73 are built for
TRF37A73: common questions
Where can I find a TRF37A73 reference design?
Each of the 6 boards on this page is a real design using the TRF37A73. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TRF37A73 VCC pin connected?
The VCC pin has a capacitor to GND on 5 of 5 designs, most often 100 pF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the TRF37A73.
How is the TRF37A73 RFIN pin connected?
The RFIN pin has a series capacitor on 5 of 5 designs, most often 18 pF (then 100 pF). Counted from the KiCad layouts of 5 open source designs using the TRF37A73.
How is the TRF37A73 RFOUT pin connected?
The RFOUT pin has a series capacitor on 5 of 5 designs, most often 18 pF (then 100 pF). Counted from the KiCad layouts of 5 open source designs using the TRF37A73.
What parts are used alongside the TRF37A73?
The ADF4158, SKY65404, 5400BL15B050E, HMC431LP4 and PAT1220-C-6DB appear in the most repositories here.
Which microcontrollers do boards using the TRF37A73 use?
Most are built on FPGA (3).
How big is a typical board using the TRF37A73?
The median is 98.2 × 53.4 mm, and 17% are two-layer designs.
What is the most popular open source board using the TRF37A73?
By GitHub stars, Fmcw by matthuszagh, with 66 stars.
Can I simulate one of these boards using the TRF37A73 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.