8 open source boards using the ADF4158
Real designs built with the ADF4158, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Fmcw
matthuszagh
118.6 × 83.2 mm432 parts4LApache-2.066STM32
Radar v2
ckflight
90.2 × 40 mm264 parts4LGPL-3.055ADF4158
daniestevez
55 × 25 mm78 parts4LCERN-OHL-P-2.030STM32
Radar v2
TonyStark2007
90.2 × 40 mm264 parts4LGPL-3.015FPGA
5-6GHz-FMCW-Radar
Radar-Uniwa
101.8 × 46.9 mm427 parts4LMIT1FPGA
Fmcw nightly
matthuszagh
94.6 × 83.4 mm424 parts4LApache-2.066Radar RF
ckflight
42.9 × 24.5 mm138 parts4LGPL-3.055Radar RF
TonyStark2007
42.9 × 24.5 mm138 parts4LGPL-3.015
How designs wire the ADF4158
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADF4158 connects to, and the resistors, capacitors and other passives placed on it.
- The RFINB pin has a capacitor to GND on 5 of 5 designs, most often 100 pF (then 10 pF).
- The RFINA pin has a series capacitor on 5 of 5 designs, most often 10 pF (then 2 pF).
- The AVDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 pF).
- The SDVDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CPGNDpin 1 | Connected to: GND 100% | — |
| AGNDpin 2, 3, 25 | Connected to: GND 100% | — |
| RFINBpin 4 | Connected to: Signal 100% |
|
| RFINApin 5 | Connected to: Signal 100% |
|
| AVDDpin 6, 7, 8 | Connected to: 3.3V 60% · a signal 40% |
|
| REFINpin 9 | Connected to: Signal 100% |
|
| DGNDpin 10 | Connected to: GND 100% | — |
| SDGNDpin 11 | Connected to: GND 100% | — |
| CLKpin 14 | Connected to: A connector 40% |
|
| SDVDDpin 18 | Connected to: 3.3V 60% · a signal 40% |
|
| DVDDpin 19 | Connected to: 3.3V 60% · a signal 40% |
|
| SW1pin 20 | Connected to: Signal 100% |
|
| SW2pin 21 | Connected to: Not connected 80% · a signal 20% | — |
| VPpin 22 | Connected to: 5V 80% · a signal 20% |
|
| RSETpin 23 | Connected to: Signal 100% |
|
| CPpin 24 | Connected to: TLV172DCK 40% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fmcw by matthuszagh, Radar RF by ckflight, ADF4158 PCB by daniestevez and Radar RF by TonyStark2007.
The ADF4158 in open source designs
The gallery holds 8 open source boards using the ADF4158 from 5 GitHub repositories; a typical one measures about 90.2 × 40 mm and carries around 264 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Fmcw by matthuszagh.
Parts used alongside the ADF4158
What boards using the ADF4158 are built for
ADF4158: common questions
Where can I find a ADF4158 reference design?
Each of the 8 boards on this page is a real design using the ADF4158. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ADF4158 RFINB pin connected?
The RFINB pin has a capacitor to GND on 5 of 5 designs, most often 100 pF (then 10 pF). Counted from the KiCad layouts of 5 open source designs using the ADF4158.
How is the ADF4158 RFINA pin connected?
The RFINA pin has a series capacitor on 5 of 5 designs, most often 10 pF (then 2 pF). Counted from the KiCad layouts of 5 open source designs using the ADF4158.
What decoupling capacitors do designs use on the ADF4158 AVDD pin?
The AVDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 pF). Counted from the KiCad layouts of 5 open source designs using the ADF4158.
What parts are used alongside the ADF4158?
The SKY65404, TRF37A73, 5400BL15B050E, HMC431LP4 and PAT1220-C-6DB appear in the most repositories here.
Which microcontrollers do boards using the ADF4158 use?
Most are built on FPGA (3) and STM32 (2).
How big is a typical board using the ADF4158?
The median is 90.2 × 40 mm, and 0% are two-layer designs.
What is the most popular open source board using the ADF4158?
By GitHub stars, Fmcw by matthuszagh, with 66 stars.
Can I simulate one of these boards using the ADF4158 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.