3 open source boards using the NCP1117-5.0
Real designs built with the NCP1117-5.0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Broadcast clock
espena
239.5 × 239.5 mm440 parts4LGPL-3.028
Microchip SAMMega
fortytwosystems
101.5 × 53.3 mm73 parts2LGPL-3.04
Microchip SAMUno
68.5 × 53.3 mm66 parts2LGPL-3.02
The NCP1117-5.0 in open source designs
The gallery holds 3 open source boards using the NCP1117-5.0 from 3 GitHub repositories; a typical one measures about 101.5 × 53.3 mm and carries around 73 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Broadcast clock by espena.
Parts used alongside the NCP1117-5.0
Microcontrollers on boards using the NCP1117-5.0
What boards using the NCP1117-5.0 are built for
NCP1117-5.0: common questions
Where can I find a NCP1117-5.0 reference design?
Each of the 3 boards on this page is a real design using the NCP1117-5.0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NCP1117-5.0?
The FT231XQ, LMV358, LP2985-3.3 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the NCP1117-5.0 use?
Most are built on Microchip SAM (2) and ESP32 (1).
How big is a typical board using the NCP1117-5.0?
The median is 101.5 × 53.3 mm, and 67% are two-layer designs.
What is the most popular open source board using the NCP1117-5.0?
By GitHub stars, Broadcast clock by espena, with 28 stars.
Can I simulate one of these boards using the NCP1117-5.0 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.