10 open source boards using the NRF54L15-QFAA-R

Real designs built with the NRF54L15-QFAA-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the NRF54L15-QFAA-R

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the NRF54L15-QFAA-R connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The ANT pin has a inductor on 6 of 6 designs, most often 2.7 nH.
  • The DECRF pin has a capacitor to GND on 6 of 6 designs, most often 2.2 nF (then 10 nF).
  • The XC1 pin has a crystal on 6 of 6 designs, most often 32 MHz.
P1.00/XL1pin 1Connected to: Signal 83% · not connected 17%
  • Crystal on 83% · 32.768 kHz (5)
P1.01/XL2pin 2Connected to: Signal 83% · not connected 17%
  • Crystal on 83% · 32.768 kHz (5)
P1.06/ASO(1)/AIN2pin 7Connected to: A connector 33%
  • Series resistor on 33% · 8.2 kΩ (1), 4.7 kΩ (1)
P1.07/ASI(1)/AIN3pin 8Connected to: A connector 33%
  • Series resistor on 33% · 8.2 kΩ (1), 4.7 kΩ (1)
VDDpin 10, 22, 36, 47, 48Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (50), 10 µF (12)
  • Inductor on 33% · 2.2 µH (5), 4.7 µH (1)
P2.10/TRACEDATA(3)pin 21Connected to: Not connected 67% · a signal 33%
RESETpin 30Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 1 kΩ (2), 0 Ω (1)
  • Capacitor to GND on 33% · 3.9 pF (2)
ANTpin 31Connected to: Signal 100%
  • Inductor on 100% · 2.7 nH (4)
VSS_PApin 32Connected to: GND 100%
DECRFpin 33Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 nF (4), 10 nF (3), 2.2 µF (3)
  • Inductor on 50%
  • Ferrite bead on 33%
XC1pin 34Connected to: Signal 100%
  • Crystal on 100% · 32 MHz (5)
XC2pin 35Connected to: Signal 100%
  • Crystal on 100% · 32 MHz (5)
P1.09/ASO(2)/RADIO(0)pin 37Connected to: Signal 83% · not connected 17%
  • Resistor to GND on 33% · 100 kΩ (2)
P1.12/ASI(3)/RADIO(3)/AIpin 40Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 8.2 kΩ (1), 0 Ω (1)
DECApin 43Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 µF (4), 10 nF (3), 2.2 nF (3)
  • Inductor on 50%
  • Ferrite bead on 33%
VSSpin 44Connected to: GND 100%
DECDpin 45Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 µF (4)
  • Inductor on 83% · 4.7 µH (3)
  • Ferrite bead on 33%
DCCpin 46Connected to: Signal 100%
  • Inductor on 100% · 4.7 µH (4)
PADpin 49Connected to: GND 100%

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nrf54 promicro by brendose, Smartbag core by claudiofin, Phial hw by golioth and Phasetag by JaphD.

The NRF54L15-QFAA-R in open source designs

The gallery holds 10 open source boards using the NRF54L15-QFAA-R from 7 GitHub repositories; a typical one measures about 54.5 × 45 mm and carries around 86 components.

90% use four copper layers or more, and 30% carry an open source license.

The most starred is Nrf54 promicro by brendose.

Parts used alongside the NRF54L15-QFAA-R

Microcontrollers on boards using the NRF54L15-QFAA-R

NRF54L15-QFAA-R: common questions

Where can I find a NRF54L15-QFAA-R reference design?

Each of the 10 boards on this page is a real design using the NRF54L15-QFAA-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the NRF54L15-QFAA-R VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the NRF54L15-QFAA-R.

How is the NRF54L15-QFAA-R ANT pin connected?

The ANT pin has a inductor on 6 of 6 designs, most often 2.7 nH. Counted from the KiCad layouts of 6 open source designs using the NRF54L15-QFAA-R.

How is the NRF54L15-QFAA-R DECRF pin connected?

The DECRF pin has a capacitor to GND on 6 of 6 designs, most often 2.2 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the NRF54L15-QFAA-R.

Which microcontrollers do boards using the NRF54L15-QFAA-R use?

Most are built on Nordic nRF (10).

How big is a typical board using the NRF54L15-QFAA-R?

The median is 54.5 × 45 mm, and 10% are two-layer designs.

What is the most popular open source board using the NRF54L15-QFAA-R?

By GitHub stars, Nrf54 promicro by brendose, with 9 stars.

Can I simulate one of these boards using the NRF54L15-QFAA-R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part