5 open source boards using the NUF2042XV6T1G
Real designs built with the NUF2042XV6T1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Rusty probe
probe-rs
40 × 14 mm85 parts4LNo license170STM32
350 Flight controller
ThaoMinhHoang
98.7 × 104 mm233 parts4LNo license3Zeus le rev-2
lopsided98
76.6 × 26 mm82 parts6LGPL-3.02- schematic only · 58 partsSTM32
Drone v0
Prosjekt-gruppe
58 parts2LMIT5 Zeus le
lopsided98
50 × 50 mm76 parts6LGPL-3.02
The NUF2042XV6T1G in open source designs
The gallery holds 5 open source boards using the NUF2042XV6T1G from 4 GitHub repositories; a typical one measures about 63.3 × 38 mm and carries around 82 components.
80% use four copper layers or more, and 60% carry an open source license.
The most starred is Rusty probe by probe-rs.
Microcontrollers on boards using the NUF2042XV6T1G
What boards using the NUF2042XV6T1G are built for
NUF2042XV6T1G: common questions
Where can I find a NUF2042XV6T1G reference design?
Each of the 5 boards on this page is a real design using the NUF2042XV6T1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the NUF2042XV6T1G use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the NUF2042XV6T1G?
The median is 63.3 × 38 mm, and 20% are two-layer designs.
What is the most popular open source board using the NUF2042XV6T1G?
By GitHub stars, Rusty probe by probe-rs, with 170 stars.
Can I simulate one of these boards using the NUF2042XV6T1G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.