4 open source boards using the OLED_DISPLAY

Real designs built with the OLED_DISPLAY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The OLED_DISPLAY in open source designs

The gallery holds 4 open source boards using the OLED_DISPLAY from 3 GitHub repositories; a typical one measures about 60.3 × 83.3 mm and carries around 46 components.

100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is Swadge-2021 by AEFeinstein.

Parts used alongside the OLED_DISPLAY

What boards using the OLED_DISPLAY are built for

OLED_DISPLAY: common questions

Where can I find a OLED_DISPLAY reference design?

Each of the 4 boards on this page is a real design using the OLED_DISPLAY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the OLED_DISPLAY?

The AP1117-33, ESP-13-WROOM-02D and OLED_CONNECTOR appear in the most repositories here.

How big is a typical board using the OLED_DISPLAY?

The median is 60.3 × 83.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the OLED_DISPLAY?

By GitHub stars, Swadge-2021 by AEFeinstein, with 6 stars.

Can I simulate one of these boards using the OLED_DISPLAY before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part