12 open source boards using the OPA1679
Real designs built with the OPA1679, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
EmoeNAP
Floyd-Fish
75 × 36 mm156 parts4LGPL-3.035Bmmx
Bemeier
40 × 110 mm145 parts4LNo license4RP2040/RP2350
Supra expor-1-PANEL
jsenzel1
50.5 × 128.5 mm127 parts2LNo license4HighZ-stereo
Supermagnum
62.5 × 97.5 mm69 parts2LCC-BY-4.02Purrtico-TLA
greyboxaudio
100 × 50 mm72 parts2LMIT1AMEK
greyboxaudio
46 × 20 mm24 parts2LMIT1Input board
robmacl
270 × 100 mm384 parts4LNo license0Analog via
starlingcode
213.5 × 128.5 mm269 parts4LCC-BY-NC-4.00Purrtico-M
greyboxaudio
100 × 66 mm96 parts2LMIT0RP2040/RP2350
Supra board
jsenzel1
49.5 × 106 mm119 parts2LNo license4PAN FADER
skylar-slideshows
36 × 110 mm84 parts4LNo license3Raspberry Pi
AS3397-Conductor
PhysicsDptAngers
97.3 × 97.8 mm53 parts2LMIT87
How designs wire the OPA1679
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the OPA1679 connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 11 of 11 designs, most often 10 kΩ (then 2.7 kΩ).
- Pin 1 has a series resistor on 10 of 11 designs, most often 1 kΩ (then 2.7 kΩ).
- The V+ pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 1 µF).
- Pin 7 has a series resistor on 9 of 11 designs, most often 2.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| -pin 2, 6, 9, 13 | Connected to: Signal 100% |
|
| +pin 3, 5, 10, 12 | Connected to: Signal 64% · GND 36% |
|
| V+pin 4 | Connected to: 15V 91% |
|
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: Signal 100% |
|
| V-pin 11 | Connected to: -15V 73% · a signal 18% |
|
| Pin 14 | Connected to: A connector 27% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AS3397-Conductor by PhysicsDptAngers, EmoeNAP by Floyd-Fish, Bmmx by Bemeier and Supra board by jsenzel1.
The OPA1679 in open source designs
The gallery holds 12 open source boards using the OPA1679 from 11 GitHub repositories; a typical one measures about 68.8 × 98.9 mm and carries around 108 components.
58% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is AS3397-Conductor by PhysicsDptAngers.
Microcontrollers on boards using the OPA1679
What boards using the OPA1679 are built for
OPA1679: common questions
Where can I find a OPA1679 reference design?
Each of the 12 boards on this page is a real design using the OPA1679. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the OPA1679 - pin?
The - pins have a series resistor on 11 of 11 designs, most often 10 kΩ (then 2.7 kΩ). Counted from the KiCad layouts of 11 open source designs using the OPA1679.
What resistor goes on the OPA1679 pin 1?
Pin 1 has a series resistor on 10 of 11 designs, most often 1 kΩ (then 2.7 kΩ). Counted from the KiCad layouts of 11 open source designs using the OPA1679.
What decoupling capacitors do designs use on the OPA1679 V+ pin?
The V+ pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the OPA1679.
Which microcontrollers do boards using the OPA1679 use?
Most are built on RP2040/RP2350 (2) and Raspberry Pi (1).
How big is a typical board using the OPA1679?
The median is 68.8 × 98.9 mm, and 58% are two-layer designs.
What is the most popular open source board using the OPA1679?
By GitHub stars, AS3397-Conductor by PhysicsDptAngers, with 87 stars.
Can I simulate one of these boards using the OPA1679 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.