3 open source boards using the OPA357AIDBVR

Real designs built with the OPA357AIDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The OPA357AIDBVR in open source designs

The gallery holds 3 open source boards using the OPA357AIDBVR from 3 GitHub repositories; a typical one measures about 40 × 36.5 mm and carries around 133 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is OpenGammaKit by vikulin.

Microcontrollers on boards using the OPA357AIDBVR

What boards using the OPA357AIDBVR are built for

OPA357AIDBVR: common questions

Where can I find a OPA357AIDBVR reference design?

Each of the 3 boards on this page is a real design using the OPA357AIDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the OPA357AIDBVR?

The LM4040AIM3-3.0+T, MICROFC-60035-SMT-TR1 and TPS7B6950DBVR appear in the most repositories here.

Which microcontrollers do boards using the OPA357AIDBVR use?

Most are built on RP2040/RP2350 (2) and Microchip SAM (1).

How big is a typical board using the OPA357AIDBVR?

The median is 40 × 36.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the OPA357AIDBVR?

By GitHub stars, OpenGammaKit by vikulin, with 19 stars.

Can I simulate one of these boards using the OPA357AIDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part