7 open source boards using the MICROFC-60035-SMT-TR1
Real designs built with the MICROFC-60035-SMT-TR1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
OpenGammaKit
vikulin
93.5 × 36.5 mm67 parts2LGPL-3.019OGK-SiPM-Board
vikulin
36.5 × 36.5 mm15 parts2LGPL-3.01RP2040/RP2350
Docimeter
georges-mars
35.7 × 35.7 mm133 parts4LNo license0Proyecto integrador gamma tracker
detectoresymicroelectronica
33.5 × 34.5 mm30 parts2LNo license0Pepper SiPM
cornellpepper
40 × 40 mm9 parts2LMIT0Tia csp test board
umn-impish
70 × 52 mm54 parts4LMPL-2.01Gripm pcb v2
umn-impish
23.3 × 60 mm27 parts2LMPL-2.01
The MICROFC-60035-SMT-TR1 in open source designs
The gallery holds 7 open source boards using the MICROFC-60035-SMT-TR1 from 6 GitHub repositories; a typical one measures about 36.5 × 36.5 mm and carries around 30 components.
71% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is OpenGammaKit by vikulin.
Parts used alongside the MICROFC-60035-SMT-TR1
Microcontrollers on boards using the MICROFC-60035-SMT-TR1
What boards using the MICROFC-60035-SMT-TR1 are built for
MICROFC-60035-SMT-TR1: common questions
Where can I find a MICROFC-60035-SMT-TR1 reference design?
Each of the 7 boards on this page is a real design using the MICROFC-60035-SMT-TR1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MICROFC-60035-SMT-TR1?
The TPS7B6950DBVR, LM4040AIM3-3.0+T and OPA357AIDBVR appear in the most repositories here.
Which microcontrollers do boards using the MICROFC-60035-SMT-TR1 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the MICROFC-60035-SMT-TR1?
The median is 36.5 × 36.5 mm, and 71% are two-layer designs.
What is the most popular open source board using the MICROFC-60035-SMT-TR1?
By GitHub stars, OpenGammaKit by vikulin, with 19 stars.
Can I simulate one of these boards using the MICROFC-60035-SMT-TR1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.