7 open source boards using the OPA4197
Real designs built with the OPA4197, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Pico H-bridge complete
rosstimo
84.1 × 66 mm77 parts4LCC-BY-NC-4.01BackupProjects maxim.laplante personal 0 20260420
TarbFela
99.9 × 76.2 mm268 parts4LNo license0STM32
Fieldmill
haunma
102 × 102 mm112 parts4LCC-BY-SA-4.01RP2040/RP2350
MotorInterfacePiPico
rosstimo
120.3 × 65.5 mm47 parts2LCC-BY-NC-4.01STM32
Fieldmill2
haunma
102 × 102 mm112 parts4LCC-BY-SA-4.0112-bit analog outputs
wntrblm
27.1 × 24 mm30 parts2LCC-BY-SA-4.02316 bit analog out
wntrblm
27.1 × 24 mm29 parts2LCC-BY-SA-4.023
The OPA4197 in open source designs
The gallery holds 7 open source boards using the OPA4197 from 4 GitHub repositories; a typical one measures about 99.9 × 66 mm and carries around 77 components.
57% use four copper layers or more, and 57% carry an open source license.
The most starred is 12-bit analog outputs by wntrblm.
Microcontrollers on boards using the OPA4197
OPA4197: common questions
Where can I find a OPA4197 reference design?
Each of the 7 boards on this page is a real design using the OPA4197. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OPA4197 use?
Most are built on RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the OPA4197?
The median is 99.9 × 66 mm, and 43% are two-layer designs.
What is the most popular open source board using the OPA4197?
By GitHub stars, 12-bit analog outputs by wntrblm, with 23 stars.
Can I simulate one of these boards using the OPA4197 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.