4 open source boards using the OPA828
Real designs built with the OPA828, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Q17-TURBO (P2)
stefaweb
190 × 75 mm95 parts2LGPL-3.025
TransimpedanceAmplifier
philipturner
92.5 × 86.5 mm95 parts2LMIT1
Q17-Mini, the Quad405 reborn
95 × 75 mm84 parts2LGPL-3.025
TIA1
21.8 × 19 mm4 parts2LMIT5
The OPA828 in open source designs
The gallery holds 4 open source boards using the OPA828 from 3 GitHub repositories; a typical one measures about 93.7 × 75 mm and carries around 90 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Q17-TURBO (P2) by stefaweb.
What boards using the OPA828 are built for
OPA828: common questions
Where can I find a OPA828 reference design?
Each of the 4 boards on this page is a real design using the OPA828. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the OPA828?
The median is 93.7 × 75 mm, and 100% are two-layer designs.
What is the most popular open source board using the OPA828?
By GitHub stars, Q17-TURBO (P2) by stefaweb, with 25 stars.
Can I simulate one of these boards using the OPA828 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.