13 open source boards using the PCA9555D

Real designs built with the PCA9555D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the PCA9555D

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the PCA9555D connects to, and the resistors, capacitors and other passives placed on it.

  • The A1 pin is tied to GND on 6 of 8 designs (a signal on 2).
  • The A2 pin is tied to GND on 6 of 8 designs (a signal on 2).
  • The A0 pin is tied to GND on 6 of 8 designs (a signal on 2).
  • The SCL pin has a pull-up to 3.3V on 5 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
A1pin 2Connected to: GND 75% · a signal 25%
A2pin 3Connected to: GND 75% · a signal 25%
IO0_3pin 7Connected to: Signal 100%
  • Series resistor on 38% · 2 kΩ (1), 10 kΩ (1), 470 Ω (1)
VSSpin 12Connected to: GND 100%
IO1_6pin 19Connected to: Signal 75% · not connected 25%
  • Series resistor on 38% · 10 kΩ (1), 1 MΩ (1), 680 kΩ (1)
A0pin 21Connected to: GND 75% · a signal 25%
SCLpin 22Connected to: A connector 50%, the microcontroller 50%
  • Pull-up to 3.3V on 63% · 10 kΩ (3), 4.7 kΩ (2)
SDApin 23Connected to: A connector 50%, the microcontroller 50%
  • Pull-up to 3.3V on 63% · 10 kΩ (3), 4.7 kΩ (2)
VDDpin 24Connected to: 3.3V 100%
  • Decoupling capacitor on 38% · 100 nF (3), 10 µF (1)

15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Z3340 VCO by brer-rabbit, Riptide by SharKingStudios, RICM pico by elatorre20 and RICM Greenpower Instrument Cluster by ricomputermuseum.

The PCA9555D in open source designs

The gallery holds 13 open source boards using the PCA9555D from 8 GitHub repositories; a typical one measures about 158.1 × 96.2 mm and carries around 133 components.

54% use four copper layers or more, and 46% carry an open source license.

The most starred is Zoxnoxious Z5524 (SSI2130/AS3394) by brer-rabbit.

Parts used alongside the PCA9555D

Microcontrollers on boards using the PCA9555D

PCA9555D: common questions

Where can I find a PCA9555D reference design?

Each of the 13 boards on this page is a real design using the PCA9555D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCA9555D A1 pin connected?

The A1 pin is tied to GND on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the PCA9555D.

How is the PCA9555D A2 pin connected?

The A2 pin is tied to GND on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the PCA9555D.

How is the PCA9555D A0 pin connected?

The A0 pin is tied to GND on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the PCA9555D.

Which microcontrollers do boards using the PCA9555D use?

Most are built on ESP32 (5) and RP2040/RP2350 (3).

How big is a typical board using the PCA9555D?

The median is 158.1 × 96.2 mm, and 46% are two-layer designs.

What is the most popular open source board using the PCA9555D?

By GitHub stars, Zoxnoxious Z5524 (SSI2130/AS3394) by brer-rabbit, with 68 stars.

Can I simulate one of these boards using the PCA9555D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part