6 open source boards using the PCA9555PW,118

Real designs built with the PCA9555PW,118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The PCA9555PW,118 in open source designs

The gallery holds 6 open source boards using the PCA9555PW,118 from 4 GitHub repositories; a typical one measures about 117 × 72.8 mm and carries around 133 components.

83% use four copper layers or more, and 83% carry an open source license.

The most starred is Shipwrecked pcb by mpkendall.

Microcontrollers on boards using the PCA9555PW,118

What boards using the PCA9555PW,118 are built for

PCA9555PW,118: common questions

Where can I find a PCA9555PW,118 reference design?

Each of the 6 boards on this page is a real design using the PCA9555PW,118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PCA9555PW,118 use?

Most are built on AVR/Arduino (1), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the PCA9555PW,118?

The median is 117 × 72.8 mm, and 17% are two-layer designs.

What is the most popular open source board using the PCA9555PW,118?

By GitHub stars, Shipwrecked pcb by mpkendall, with 17 stars.

Can I simulate one of these boards using the PCA9555PW,118 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part