7 open source boards using the PCF8575DBR
Real designs built with the PCF8575DBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
EL6170 Pro Max Plus
jsjsjsjsjsjsjson
128 × 70.5 mm159 parts2LNo license7ESP32
Homething c6
landonr
37 × 130 mm40 parts2LNo license6Nordic nRF
Modular-Keyboard
hashim-cpro
409.7 × 97.2 mm260 parts2LNo license4ESP32
SnakeGame
drvnprgrmr
90 × 70 mm27 parts2LMIT0AVR/Arduino
MEP MAXI 85V-1 REV 2 Keypad
JGilcreast
209 × 97.3 mm203 parts4LNo license0ESP32
Mcu modulino
OpenAir-Lab
68.9 × 53.3 mm36 parts4LMIT3ESP32
Testbed mcu
OpenAir-Lab
69.6 × 55.9 mm19 parts2LMIT3
How designs wire the PCF8575DBR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PCF8575DBR connects to, and the resistors, capacitors and other passives placed on it.
- The A1 pin is tied to GND on 6 of 6 designs.
- The A2 pin is tied to GND on 6 of 6 designs.
- The A0 pin is tied to GND on 6 of 6 designs.
- The INT pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INTpin 1 | Connected to: The microcontroller 50% |
|
| A1pin 2 | Connected to: GND 100% | — |
| A2pin 3 | Connected to: GND 100% | — |
| GNDpin 12 | Connected to: GND 100% | — |
| A0pin 21 | Connected to: GND 100% | — |
| SCLpin 22 | Connected to: The microcontroller 67%, a connector 50% |
|
| SDApin 23 | Connected to: The microcontroller 67%, a connector 50% |
|
| VCCpin 24 | Connected to: 3.3V 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EL6170 Pro Max Plus by jsjsjsjsjsjsjson, Homething c6 by landonr, Modular-Keyboard by hashim-cpro and Mcu modulino by OpenAir-Lab.
The PCF8575DBR in open source designs
The gallery holds 7 open source boards using the PCF8575DBR from 6 GitHub repositories; a typical one measures about 90 × 70.5 mm and carries around 40 components.
71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is EL6170 Pro Max Plus by jsjsjsjsjsjsjson.
Microcontrollers on boards using the PCF8575DBR
What boards using the PCF8575DBR are built for
PCF8575DBR: common questions
Where can I find a PCF8575DBR reference design?
Each of the 7 boards on this page is a real design using the PCF8575DBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PCF8575DBR A1 pin connected?
The A1 pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the PCF8575DBR.
How is the PCF8575DBR A2 pin connected?
The A2 pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the PCF8575DBR.
How is the PCF8575DBR A0 pin connected?
The A0 pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the PCF8575DBR.
Which microcontrollers do boards using the PCF8575DBR use?
Most are built on ESP32 (5), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the PCF8575DBR?
The median is 90 × 70.5 mm, and 71% are two-layer designs.
What is the most popular open source board using the PCF8575DBR?
By GitHub stars, EL6170 Pro Max Plus by jsjsjsjsjsjsjson, with 7 stars.
Can I simulate one of these boards using the PCF8575DBR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.