7 open source boards using the PCM3060
Real designs built with the PCM3060, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Main
centrevillage
100 × 100 mm176 parts4LMIT10DeltaSDR
cernohorsky
100 × 80 mm173 parts2LNo license9RP2040/RP2350
RP Mini Dsp
JackUlbrichBaker
39 × 54 mm67 parts2LNo license0Raspberry Pi
RPi-Ham
bitbyt3r
65 × 56.5 mm41 parts2LNo license0RP2040/RP2350
Space
ThisIsNotRocketScience
119.4 × 110.4 mm249 parts4LMIT87Pokus
cernohorsky
100 × 80 mm141 parts2LNo license9Raspi audio
jonronen
53.3 × 44.7 mm27 parts2LNo license1
How designs wire the PCM3060
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PCM3060 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- The VCOM pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF).
- The ZEROR pin is left unconnected on 6 of 6 designs.
- The ZEROL pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MC/SCL/FMTpin 1 | Connected to: The microcontroller 33% · GND 33% |
|
| MD/SDA/DEMPpin 2 | Connected to: The microcontroller 33% · GND 33% |
|
| SCKI1pin 6 | Connected to: The microcontroller 50% |
|
| VDDpin 7 | Connected to: 3.3V 100% |
|
| DGNDpin 8 | Connected to: GND 100% | — |
| SCKI2pin 9 | Connected to: The microcontroller 33% · GND 17% |
|
| ZERORpin 13 | Connected to: Not connected 100% | — |
| ZEROLpin 14 | Connected to: Not connected 100% | — |
| ~RST~pin 15 | Connected to: The microcontroller 33% · VDD 33% |
|
| SGNDpin 16 | Connected to: GND 100% | — |
| VOUTR-pin 17 | Connected to: Not connected 67% · a signal 33% |
|
| VOUTR+pin 18 | Connected to: Signal 100% |
|
| VOUTL-pin 19 | Connected to: Not connected 67% · a signal 33% |
|
| VOUTL+pin 20 | Connected to: Signal 100% |
|
| VCOMpin 21 | Connected to: Signal 100% |
|
| AGND2pin 22 | Connected to: GND 100% | — |
| AGND1pin 23 | Connected to: GND 100% | — |
| VCCpin 24 | Connected to: 5V 83% · a signal 17% |
|
| VINLpin 25 | Connected to: VINL 50% · a signal 50% |
|
| VINRpin 26 | Connected to: VINR 50% · a signal 50% |
|
| ~MS~/ADR/IFMDpin 27 | Connected to: GND 67% · VDD 33% | — |
| MODEpin 28 | Connected to: GND 50% · a signal 50% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Space by ThisIsNotRocketScience, Main by centrevillage, DeltaSDR by cernohorsky and Raspi audio by jonronen.
The PCM3060 in open source designs
The gallery holds 7 open source boards using the PCM3060 from 6 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 141 components.
71% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Space by ThisIsNotRocketScience.
Microcontrollers on boards using the PCM3060
What boards using the PCM3060 are built for
PCM3060: common questions
Where can I find a PCM3060 reference design?
Each of the 7 boards on this page is a real design using the PCM3060. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PCM3060 VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the PCM3060.
How is the PCM3060 VCOM pin connected?
The VCOM pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the PCM3060.
How is the PCM3060 ZEROR pin connected?
The ZEROR pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the PCM3060.
Which microcontrollers do boards using the PCM3060 use?
Most are built on RP2040/RP2350 (2), Raspberry Pi (1) and STM32 (1).
How big is a typical board using the PCM3060?
The median is 100 × 80 mm, and 71% are two-layer designs.
What is the most popular open source board using the PCM3060?
By GitHub stars, Space by ThisIsNotRocketScience, with 87 stars.
Can I simulate one of these boards using the PCM3060 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.