15 open source boards using the PUSB3FR4Z

Real designs built with the PUSB3FR4Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

The PUSB3FR4Z in open source designs

The gallery holds 15 open source boards using the PUSB3FR4Z from 4 GitHub repositories; a typical one measures about 233 × 160 mm and carries around 510 components.

93% use four copper layers or more, and 87% carry an open source license.

The most starred is TinyFPGA-EX by tinyfpga.

Microcontrollers on boards using the PUSB3FR4Z

PUSB3FR4Z: common questions

Where can I find a PUSB3FR4Z reference design?

Each of the 15 boards on this page is a real design using the PUSB3FR4Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PUSB3FR4Z use?

Most are built on STM32 (13) and FPGA (2).

How big is a typical board using the PUSB3FR4Z?

The median is 233 × 160 mm, and 7% are two-layer designs.

What is the most popular open source board using the PUSB3FR4Z?

By GitHub stars, TinyFPGA-EX by tinyfpga, with 78 stars.

Can I simulate one of these boards using the PUSB3FR4Z before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part